John Deere 2112E Specifications Detailing Dimensions Weight and Capacity

Pick the John Deere 2112E if your project needs a scraper with a heaped capacity near 12 cubic yards and a struck capacity close to 9 cubic yards. Its typical cutting width of about 12 feet supports balanced material flow while staying practical for mid-scale sites.

Count on an average operating weight around 19,000 pounds paired with 20.5 x 25 tires to keep traction steady across mixed terrain. A bowl width near 10.5 feet keeps fill efficient without making the scraper too wide for tighter haul roads.

Use the hydraulic-controlled apron and proven ejector system to speed up unloading and reduce cycle times. Pairing the 2112E with a tractor delivering around 300–360 HP helps maintain steady drawbar pull under load, even on longer hauls or softer ground.

Review these specs directly against your site’s production targets and soil type to confirm the 2112E matches daily needs. Focusing on specific figures helps avoid downtime and keeps planning accurate.

John Deere 2112E Detailed Technical Specifications

Choose the John Deere 2112E for its heaped capacity around 12 cubic yards and struck capacity near 9.5 cubic yards, matching mid-sized hauling tasks. The cutting width measures roughly 12 feet, and it handles loads up to about 28,000 pounds without losing balance on uneven terrain.

The bowl opens nearly 64 inches, which helps reduce fill times and keep cycles quick. Hydraulic apron and ejector systems move quickly to ensure steady unloading and prevent material sticking. Tires sized around 23.5×25 combine traction and flotation on softer ground.

With an empty weight near 17,500 pounds, pairing it with a tractor delivering around 250 HP keeps towing reliable. Reinforced box-section steel frame resists twisting under repeated stress, supporting longer service life during daily use.

Weight Capacity and Load Distribution

The John Deere 2112E supports a maximum operating weight of approximately 1,450 kilograms (3,197 pounds), including the operator and attachments. Maintaining proper load distribution enhances stability and machine control during operation.

To optimize performance and safety:

• Keep the load balanced between front and rear axles, avoiding excessive weight on either end.
• Limit payload on the loader to its rated capacity of around 400 kilograms (880 pounds) to prevent strain on hydraulic systems.
• When using rear implements, verify that combined weight does not exceed the rear axle’s capacity of roughly 600 kilograms (1,323 pounds).
• Secure loads firmly to prevent shifting that may affect balance and traction.

Uneven load distribution can reduce maneuverability and increase wear on tires and suspension components. Regularly inspect the machine for signs of overloading or imbalance, especially when switching attachments or transporting heavy materials.

Following these guidelines ensures the 2112E operates within safe weight limits, maximizing both longevity and operational efficiency.

Blade Dimensions and Cutting Width

The John Deere 2112e features a blade width of approximately 42 inches, allowing it to cover a substantial area in a single pass. This size balances maneuverability and efficient cutting, making it suitable for various mowing tasks.

The cutting width is designed to optimize productivity while maintaining precise control over trimming. With a 42-inch cutting deck, the machine handles medium to large spaces effectively without sacrificing agility.

The blade thickness and material composition ensure durability under typical operating conditions, reducing the frequency of maintenance. Sharp blades paired with this cutting width deliver a clean and even cut, improving overall lawn appearance.

Adjustments to cutting height can be made easily to match specific grass types and terrain conditions, with the blade size supporting consistent performance across these settings.

Hydraulic Flow Rates and Pressure Ratings

The John Deere 2112E operates with a hydraulic flow rate of approximately 10 gallons per minute (GPM), ensuring smooth performance for a variety of attachments. This flow supports efficient operation of loader functions and auxiliary hydraulics without lag.

Its hydraulic system maintains a maximum pressure rating of 2,500 psi, providing sufficient force for demanding tasks such as lifting, digging, and pushing. The pressure rating allows consistent power delivery while protecting system components from overload.

Operators should verify compatibility of attachments with these flow and pressure values to avoid performance issues or damage. The balanced combination of flow rate and pressure ensures precise control and reliable responsiveness during operation.

Regular hydraulic fluid checks and maintenance extend system longevity and maintain optimal flow characteristics. Using manufacturer-recommended fluid types keeps pressure stable and prevents premature wear.