Technical Specifications and Key Features of the John Deere 4475 Skid Steer

Choose the John Deere 4475 if you need a compact skid steer loader with a reliable 33.5-horsepower Yanmar diesel engine and a rated operating capacity of 1,150 lbs. The machine delivers consistent hydraulic performance through an open-center system with 15.3 GPM flow at 2,500 PSI.

Keep turning radius and transport weight in mind: the 4475 has a wheelbase of 34.6 inches and an operating weight of around 4,500 lbs. It fits well into confined job sites while offering the lifting strength required for landscaping, light construction, and agricultural tasks.

Maintain the machine at 100-hour intervals for engine oil and filters, and 500-hour intervals for hydraulic fluid and chain case inspections. Grease all pivot points daily to avoid early wear. Stick to 10W-30 oil and JD-spec hydraulic fluid for optimal compatibility with factory components.

Use the 4475 with attachments like buckets, pallet forks, or augers, keeping the standard quick-attach system and auxiliary hydraulics in mind. Maximum travel speed reaches 6.2 mph, which supports efficient loading cycles without sacrificing stability on uneven ground.

John Deere 4475 Skid Steer Loader Technical Specifications

Choose the John Deere 4475 if you need a compact skid steer loader with reliable performance in tight workspaces. It delivers 33.5 horsepower through a Yanmar 3-cylinder diesel engine (model 3TNE84) and uses a hydrostatic transmission with two independent hydraulic drive motors for responsive control.

The rated operating capacity reaches 1,350 lbs (612 kg), while the tipping load is approximately 2,700 lbs (1,225 kg). The lift path follows a radial design, offering better reach at mid-lift, which is practical for loading trucks or handling pallets on flat terrain.

This model weighs around 4,500 lbs (2,041 kg), including standard counterweights. Its wheelbase measures 35.4 inches (899 mm), and the overall width with standard 10×16.5 tires is 55.7 inches (1,415 mm), making it suitable for confined construction or agricultural areas.

Hydraulic flow is rated at 11.4 gpm (43.2 L/min), supporting a wide range of attachments without the need for high-flow capability. Ground clearance is 7.5 inches (191 mm), and the machine’s turning radius is tight at 74.4 inches (1,890 mm), improving maneuverability near obstacles.

Use the 4475’s quick-attach system to switch attachments efficiently. The operator station includes a mechanical seat, ROPS/FOPS protection, and clear visibility in all directions. Regular service access points are located under the rear hood and include filters, battery, and hydraulic reservoirs.

Engine Characteristics and Hydraulic System Parameters of the 4475 Model

Select the John Deere 4475 if you need a skid steer loader with a proven 2.4L 4-cylinder diesel engine delivering 53 horsepower at 2800 rpm. The engine uses natural aspiration and features a liquid cooling system. It runs on a mechanical injection pump and includes a dry-type air filter. The displacement reaches 146.5 cubic inches, ensuring consistent torque output under load.

The engine starts reliably with a 12-volt system and a standard electric starter. Cold weather performance improves with a block heater and glow plug system. Maximum torque peaks at approximately 115 lb-ft at 1600 rpm, enabling steady operation during demanding hydraulic tasks.

The hydraulic system delivers a standard flow of 15.3 gallons per minute with a maximum pressure of 3000 psi. The gear pump ensures stable performance across attachments. Operators can use the auxiliary hydraulics via quick couplers, simplifying connections to buckets, grapples, or augers. The loader arms use dual hydraulic cylinders, allowing breakout forces up to 3000 pounds.

For optimal performance, keep hydraulic oil clean and monitor fluid temperature during extended use. Use John Deere’s low-viscosity hydraulic fluid to maintain pressure stability. Replace filters every 250 operating hours and check lines for wear or leaks after 100 hours of use.

Loader Operating Capacities and Lift Mechanism Details

Choose the John Deere 4475 if you need a skid steer loader with a rated operating capacity of 1,250 lbs (567 kg) and a tipping load of 2,500 lbs (1134 kg). This capacity ensures reliable performance during material handling on compact job sites.

The loader uses a vertical lift path, offering enhanced reach at full lift height – 109 inches (2769 mm) to the hinge pin – ideal for loading into trucks and high-sided containers. The hydraulic lift cylinders provide fast, stable motion with responsive control under load.

Opt for the optional counterweights if you frequently work with heavier loads. They increase stability without compromising maneuverability, especially useful on uneven terrain.

The quick-attach system supports a wide range of buckets and attachments, allowing tool-free swaps for increased versatility. Combined with a breakout force of approximately 2,300 lbs (1043 kg), the loader can easily handle compacted material, gravel, or pallets.

Maintain the linkage by checking pivot points and greasing zerk fittings at regular intervals. This prevents wear and keeps the lift arms performing consistently under stress.

Dimensions, Weight and Tire Configuration for Job Site Compatibility

Choose the John Deere 4475 when you need a compact skid steer loader that fits tight spaces without sacrificing stability. Its overall length with bucket reaches approximately 120.5 inches, while the height to the top of the cab is 74.6 inches. The wheelbase measures 35.4 inches, supporting effective maneuverability on confined job sites.

Operating weight stands at about 5,530 pounds, allowing secure transport on standard trailers and solid traction on uneven surfaces. The machine’s ground clearance of 6.5 inches ensures reliable operation across compacted gravel, soft soil, or mixed terrain without frequent bottom scraping.

For tire configuration, the 4475 comes equipped with 10×16.5 heavy-duty pneumatic tires as standard. These provide a balanced combination of flotation and traction. If the site involves frequent operation on concrete or asphalt, consider switching to flat-proof or solid tires to reduce wear and downtime.

• Length with bucket: ~120.5 in (3.06 m)
• Height to cab: ~74.6 in (1.89 m)
• Wheelbase: ~35.4 in (0.90 m)
• Operating weight: ~5,530 lbs (2,508 kg)
• Ground clearance: ~6.5 in (0.17 m)
• Standard tires: 10×16.5 pneumatic

Match the loader’s dimensions and tire setup to the site surface and access constraints to maintain productivity and reduce repositioning time.